control4log

Analog in - and outputs

2 AI with a working range of 0 – 20 mA or 0-10 V, freely scalable by parameters

2 AO with a working range of 0 – 20 mA or 0-10 V, freely scalable by parameters

Signal duplicators of the outputs can be connected to the inputs.

Digital in - and outputs

4 DI with a working range of 0 - 24 VDC, freely scalable by parameters

4 DO with a working range of 0 - 24 VDC, freely scalable by parameters

Signal duplicators of the outputs can be connected to the inputs.

E-mail alerting

Via a provider such as Gmail, Hotmail or Outlook, an alarm can be sent by e-mail according to adjustable setpoints.

USB-IP Gateway

Devices or controllers which have their own service software over USB or serial interfaces, can easily and uncomplicatedly be made "Internet" compatible. This enables a secure remote maintenance through the Internet.

Configuration

The device can be configured locally by a USB stick or through TCP/IP. To configure the device through TCP/IP, a software or the web4log m2m cloud solution can be used.

vUSB

The virtual USB (vUSB) enables the remote download of files or data logs from existing controllers as well as the creation and download of backups, upload and installation of software and firmware and the possibility of remote software updates.

Video server

A dedicated video server is available via the control4log. It supports both live streaming of video data as well as the storage and management of recordings. Data can be stored on HDD, SSD, NAS, or server systems flexibly adaptable to specific requirements.

Audit Trail – GMPSS

The x4l system provides an audit trail with GMPSS, which can be optionally enabled or disabled. When active, GMPSS logs the user ID, login activities, and all parameter changes (before/after), while also documenting system failures. This ensures a GMP-compliant audit trail.

Smart Table

The workbench is becoming smarter, whether in the laboratory, in practice, or elsewhere. With our control4log device, the Cloud web4log, and the Freeware remote2control, suppliers of devices such as…

• Scales
• Analysis devices
• Measuring devices
• Reactors
• Triggers
• Disinfection machines
• Heating and cooling devices
• Centrifuges
• Mixing and shaking devices
• etc.
  
  
  … can carry out remote diagnoses, maintenance, or interference of the devices with software for maintenance from the manufacturer.

Maintenance Planning

System controls for the compressor are connected to the M2M Cloud web4log via Gateway, which tracks the service period and total running time of the system in a 24-hour period and saves it in a database. Based on the saved hourly values ...

... a report is generated that calculates a date for each compressor on which a service must be planned, based on the average running hours per month, quarter and year

... a line graph is created that shows the monthly operating hours for the respective compressors in order to comply with the service contracts

... the technical customer service is informed via e-mail about the planned device servicing before the next service

... the technical customer service is informed via e-mail about the device services to be done

Remote Maintenance and Monitoring

Safety workbenches and their accessories are monitored by the control4log IOs in order to avoid unnecessary and time-consuming infiltration and decontamination in laboratories with increased safety levels that are difficult to access. For this purpose, digital and analog values are monitored and recorded in order to ...

• ...distinguish a possible malfunction from routine maintenance on the technical customer service dashboard
  
  
• ...to alert via e-mail with freely definable texts when limit values or alert situations are reached
  
  
• ...to inform by e-mail with freely definable texts when a service cycle is reached (filter full)
  
  
• ...to record and store historical values in order to be able to prove the functionality of the system.
  
  Additionally, the four USB ports on the control4log are used to ...
  
  
• ...access the microcontroller controllers by means of a USB connection over the internet in order to enable an initial diagnosis.

Facility Management 4.0 with IIoT

Monitoring, remote maintenance, and e-mail notifications can be implemented quickly and easily, independent of the system and controller

For a standardized integration of any equipment from other manufacturers, in worst-case scenarios connect an error, readiness, and operation indicator light to a digital input. Configure it with control4log using a USB storage device, and you're done!

For remote maintenance of equipment, we utilize the existing maintenance software. With our remote2control software, you can easily transfer existing software and settings to a virtual local Windows workstation via a USB adapter. This enables cost-effective and user-friendly remote maintenance.

Our solutions support a variety of equipment, including heating, ventilation, and air conditioning (HVAC) systems, heat pumps, laboratory equipment such as scales, analytical devices and shakers, uninterruptible power supplies (UPS), home automation (PLC), and much more.

Don't miss anymore of this important information and optimize the maintenance of your equipment with our reliable monitoring, convenient remote maintenance, and automatic E-Mail notifications. Contact us today!

Burglary Prevention

Using the control4log and the M2M cloud web4log, Cronjobs are created to...

o Automate control of the lights and blinds via digital outputs as burglary protection when the customer is away on vacation

o Send e-mail alerts based on freely definable limit values via the digital inputs and connected motion detectors and/or switches Additionally, the four USB ports on the control4log are used to...

o access the USB cameras via USB mediation over the Internet using a Windows operating system 10 or higher

Siemens Gateway

Using a PLC Program S7-1200 Communication Module RS232 it is possible to ...

• query current values from the controller on an RS232 interface in the M2M cloud web4log and visualize them on a dashboard
  
  
• send alert e-mails tailored to customer requirements on an RS232 interface, using the program Node-Red on which control4log is installed.